Round Watertight Deck Hatches
400mm, 500mm, & 600mm
Bureau Veritas Type-Approved round watertight deck hatches available in 400mm, 500mm and 600mm configurations, designed for marine access and selected emergency escape applications.
Sizing & Specifications
See the key dimensions, weights and configuration options for the Seatite round watertight deck hatches.
Full technical details are available in the datasheet.
| Specification | 400mm Round | 500mm Round | 600mm Round |
|---|---|---|---|
| Clear Opening (Aperture) | 340mm | 430mm | 540mm |
| Overall Cover Diameter | 400mm | 500mm | 600mm |
| Overall Deck Ring Diameter | 510mm | 615mm | 730mm |
| Deck Cut Out (Weld-in Steel) | 415mm | 515mm | 615mm |
| Deck Cut Out (Bolt-in Aluminium) | 430mm | 530mm | 630mm |
| Corner Radius for Cut Out | N/A | N/A | N/A |
| Depth of Hatch (Access only) | 130mm | 140mm | 140mm |
| Depth of Hatch (Escape) | N/A | 175mm | 175mm |
| Weight: Hatch / Lid | 7 kg | 11 kg | 14 kg |
| Weight: Steel Deck Ring | 3.5 kg | 5 kg | 6 kg |
| Weight: Aluminium Deck Ring | 4 kg | 6 kg | 8 kg |
Type Approved Product
Management System Certified
Sizing & Specifications
Select the appropriate configuration below to ensure correct deck cut-outs during ship fabrication.
Both sizes can be supplied with optional heavy-duty hinges.
Type Approved Product
Management System Certified
Certified Watertight Performance
Strength Through Circular Geometry
The circular geometry of Seatite’s Round Watertight Deck Hatches provides an efficient structural profile, distributing applied loads evenly around the hatch perimeter. With no corners in the hatch opening, the round configuration provides a continuous geometry suited to demanding marine access and watertight applications.
Seatite hatches are Bureau Veritas Type-Approved for watertight applications at a certified pressure of 5.5 psi, equivalent to approximately 12 ft (3.7 m) of water head. Beyond the certified requirement, Seatite hatches have also been pressure tested at more than 35 psi, equivalent to approximately 80 ft (24 m) of water head.
Available in 400mm, 500mm and 600mm configurations, the round range provides compact access solutions across a variety of marine installations, with selected configurations also available for emergency escape applications.
With only one central point of operation, the Seatite locking system reduces the number of moving components compared with conventional multi-point arrangements. This simplified design supports reduced maintenance requirements and dependable long-term performance in demanding marine environments.
Certified Watertight Performance
Strength Through Circular Geometry
The circular geometry of Seatite’s Round Watertight Deck Hatches provides an efficient structural profile, distributing applied loads evenly around the hatch perimeter. With no corners in the hatch opening, the round configuration provides a continuous geometry suited to demanding marine access and watertight applications.
Seatite hatches are Bureau Veritas Type-Approved for watertight applications at a certified pressure of 5.5 psi, equivalent to approximately 12 ft (3.7 m) of water head. Beyond the certified requirement, Seatite hatches have also been pressure tested at more than 35 psi, equivalent to approximately 80 ft (24 m) of water head.
Available in 400mm, 500mm and 600mm configurations, the round range provides compact access solutions across a variety of marine installations, with selected configurations also available for emergency escape applications.
With only one central point of operation, the Seatite locking system reduces the number of moving components compared with conventional multi-point arrangements. This simplified design supports reduced maintenance requirements and dependable long-term performance in demanding marine environments.
Single-Point Operation:
Eliminating Complex Mechanical Failure Points
Standard commercial marine hatches often rely on complex multi-point dog locks, DIN toggles or quick-pins. With multiple moving components exposed to demanding marine environments, these systems can be more susceptible to wear, stretching or seizing over time.
Seatite simplifies the locking arrangement with a single 316 stainless-steel central locking bolt operating an internal galvanised steel strongback and solid silicone sealing ring. The central locking bolt applies uniform, equalised compression across the sealing system while reducing the number of moving components.
With fewer moving components than conventional multi-point locking arrangements, the Seatite system is designed to reduce maintenance requirements and deliver dependable long-term performance in demanding marine environments.
Optimising Shipyard Installation
Flexible Deck Ring Options
Seatite round hatches are available with an LM6 marine-grade aluminium deck ring, providing a lightweight, corrosion-resistant installation solution manufactured from the same material family as the hatch cover. For steel vessel applications, a fabricated steel deck ring is also available, allowing direct welding into compatible steel deck plating where this better suits the vessel structure and installation method.
LM6 Marine-Grade Aluminium
The round hatch cover and aluminium deck ring are manufactured from high-quality LM6 marine-grade aluminium (BS1490), combining lightweight operation with excellent corrosion resistance for demanding marine environments. Material traceability is maintained throughout the manufacturing process.
Certified Watertight Performance
Seatite round hatches are Bureau Veritas Type-Approved, providing independently assessed technical documentation to support marine specification and class review. Final suitability should be confirmed against the vessel, installation location and applicable classification requirements.
- T-Handle Key – Used to operate the central locking mechanism.
- LM6 Aluminium Hatch Cover – Cast LM6 marine-grade aluminium (BS1490) hatch cover with anti-slip surface and integral solid silicone sealing ring fitted to the underside.
- Nylon Bush / Stop – Component within the central locking assembly.
- 316 Stainless-Steel Central Locking Bolt – Operates the internal locking mechanism.
- Preload Spring – Supports controlled loading within the locking assembly.
- Four-Arm Strongback – Internal locking component providing even seal compression around the hatch.
- Deck Ring – LM6 aluminium deck ring shown; fabricated steel deck ring also available for steel-vessel applications. A fabricated steel deck ring is also available as an option for steel-vessel applications.
Emergency Escape Configuration
Where an emergency escape configuration is specified, an additional underside lever handle can be supplied to enable rapid operation from below deck.
Optimising Shipyard Installation
Flexible Deck Ring Options
Seatite round hatches are available with an LM6 marine-grade aluminium deck ring, providing a lightweight, corrosion-resistant installation solution manufactured from the same material family as the hatch cover. For steel vessel applications, a fabricated steel deck ring is also available, allowing direct welding into compatible steel deck plating where this better suits the vessel structure and installation method.
LM6 Marine-Grade Aluminium
The round hatch cover and aluminium deck ring are manufactured from high-quality LM6 marine-grade aluminium (BS1490), combining lightweight operation with excellent corrosion resistance for demanding marine environments. Material traceability is maintained throughout the manufacturing process.
Certified Watertight Performance
Seatite round hatches are Bureau Veritas Type-Approved, providing independently assessed technical documentation to support marine specification and class review. Final suitability should be confirmed against the vessel, installation location and applicable classification requirements.
SOLAS Emergency Escape Configurations
For naval architects and vessel operators, Seatite round hatches are available in configurations designed for applications where the hatch forms part of an emergency escape arrangement under SOLAS Chapter II-2 Regulation 13 – Means of Escape. Final suitability depends on the vessel, installation location and applicable flag-state and classification requirements.
The 500mm and 600mm Round Hatches can be supplied in dedicated Access / Escape configurations. These retain the hatch’s external locking capability while incorporating an internal lever handle that allows the central locking mechanism to be released from below deck, providing independent operation from the underside when required for emergency egress.
The 400mm Round Hatch is an access-only configuration. The 500mm and 600mm Access / Escape models are available with a 175mm escape frame depth to accommodate the internal escape operating arrangement.
Key Configuration Details
✓ 400mm Round Hatch – 340mm clear opening; access-only configuration
✓ 500mm Round Hatch – 430mm clear opening; Access / Escape configuration available
✓ 600mm Round Hatch – 540mm clear opening; Access / Escape configuration available
✓ 175mm escape frame depth – available on 500mm and 600mm escape configurations
Relevant Standards & Approvals
- SOLAS Chapter II-2 Regulation 13 – Means of Escape
- Bureau Veritas Type Approval
- LRQA ISO 9001 Certified
- Technical documentation available to support class review
Explore Seatite technical documentation, type approval and guidance relating to watertight integrity, means of escape and classification requirements in our Technical Resource Hub.➡️
SOLAS Emergency Escape Configurations
For naval architects and vessel operators, Seatite round hatches are available in configurations designed for applications where the hatch forms part of an emergency escape arrangement under SOLAS Chapter II-2 Regulation 13 – Means of Escape. Final suitability depends on the vessel, installation location and applicable flag-state and classification requirements.
The 500mm and 600mm Round Hatches can be supplied in dedicated Access / Escape configurations. These retain the hatch’s external locking capability while incorporating an internal lever handle that allows the central locking mechanism to be released from below deck, providing independent operation from the underside when required for emergency egress.
The 400mm Round Hatch is an access-only configuration. The 500mm and 600mm Access / Escape models are available with a 175mm escape frame depth to accommodate the internal escape operating arrangement.
Key Configuration Details
✓ 400mm Round Hatch – 340mm clear opening; access-only configuration
✓ 500mm Round Hatch – 430mm clear opening; Access / Escape configuration available
✓ 600mm Round Hatch – 540mm clear opening; Access / Escape configuration available
✓ 175mm escape frame depth – available on 500mm and 600mm escape configurations
Relevant Standards & Approvals
- SOLAS Chapter II-2 Regulation 13 – Means of Escape
- Bureau Veritas Type Approval
- LRQA ISO 9001 Certified
- Technical documentation available to support class review
Explore Seatite technical documentation, type approval and guidance relating to watertight integrity, means of escape and classification requirements in our Technical Resource Hub.➡️
Frequently Asked Questions
Technical Specifications & Compliance
Technical answers covering Seatite round watertight deck hatch specifications, installation, SOLAS compliance, locking systems and independent load testing.
What is the technical difference between a weathertight and a watertight deck hatch?
WEATHERTIGHT
External weather protection
Designed to resist water ingress from external weather conditions such as rain and sea spray. Weathertight protection is typically used where the hatch is exposed to weather rather than sustained hydrostatic water pressure.
WATERTIGHT
Certified hydrostatic pressure protection
Seatite hatches are Bureau Veritas Type-Approved for watertight applications at a certified pressure of 5.5 psi, equivalent to approximately 12 ft (3.7 m) of water head.
Tested beyond the certified requirement: While 5.5 psi / 12 ft of water head is the certified pressure covered by the Bureau Veritas Type Approval, Seatite hatches have also been pressure tested at more than 35 psi, equivalent to approximately 80 ft (24 m) of water head.
Which Seatite round hatch sizes are available for emergency escape applications?
The Seatite round hatch range is available in three sizes, with the 500mm and 600mm configurations available for Access / Escape applications, while the 400mm hatch is available for access-only use.
Compact access configuration designed for areas where a smaller circular deck aperture is required.
Available in an Access / Escape configuration where the vessel layout and applicable classification requirements permit its use.
The largest round configuration provides the greatest clear aperture within the Seatite circular hatch range and is available in an Access / Escape configuration.
When specified in an Access / Escape configuration, the 500mm and 600mm Round Hatches retain their external locking capability while incorporating an internal lever handle that allows the central locking mechanism to be released from below deck. This provides independent operation from the underside when the hatch is required for emergency egress.
Seatite Access / Escape configurations are designed for applications where means-of-escape requirements under SOLAS Chapter II-2 Regulation 13 apply. Final suitability should be confirmed against the vessel arrangement, installation location, flag-state and applicable classification requirements.
What are the benefits of a circular hatch profile over square hatches?
The circular profile gives the Seatite round hatch a naturally efficient structural form. Its continuous geometry avoids the corner transitions found in square or rectangular openings and provides even geometry around the full hatch perimeter.
Even Pressure Around the Perimeter
Circular geometry distributes applied loading continuously around the hatch perimeter, providing a balanced structural profile under pressure and deck loading.
Reduced Localised Stress Concentration
With no corners in the hatch opening, the round profile avoids the geometric stress-concentration areas associated with angular deck apertures.
Simple Deck Integration
The circular cut-out provides a straightforward deck aperture for integration with the selected Seatite deck ring and vessel structure.
The result is a strong, balanced hatch profile designed to support even loading, consistent seal compression and dependable watertight performance.
What are the exact deck cut-out dimensions for Seatite round hatches?
The exact deck cut-out depends on the style of deck ring being installed:
Cut-out diameter
Cut-out diameter
Cut-out diameter
Cut-out diameter
Cut-out diameter
Cut-out diameter
The circular deck aperture provides a straightforward opening for integration with the selected Seatite deck ring and vessel structure.
Do Seatite round hatches offer both aluminium and steel deck ring options?
Seatite round hatches are available with an LM6 marine-grade aluminium deck ring as well as a fabricated steel deck ring option for steel vessel applications. This allows the deck-ring configuration to be selected to suit the vessel structure and installation method.
LM6 Marine-Grade Aluminium
The aluminium deck ring is manufactured from LM6 marine-grade aluminium (BS1490), the same material family as the hatch cover, providing a lightweight and corrosion-resistant installation option.
- LM6 marine-grade aluminium
- Lightweight deck-ring option
- Excellent corrosion resistance
- Suitable for alternative vessel construction and installation methods
Fabricated Steel Deck Ring
For steel vessel applications, Seatite can also supply a fabricated steel deck ring designed for direct integration with the surrounding steel deck structure.
- Direct welding into compatible steel deck plating
- Straightforward steel-to-steel installation
- Reduces the need for a mechanically bolted deck-ring interface
- Reduces galvanic-isolation considerations at the deck-ring interface
How does the single central locking bolt design improve reliability over multi-toggle systems?
Standard commercial marine hatches often rely on complex multi-point dog locks, DIN toggles or quick-pins. With multiple moving components exposed to demanding marine environments, these systems can be more susceptible to wear, stretching or seizing over time.
Multiple Mechanical Failure Points
Complex locking arrangements rely on multiple components operating correctly together to maintain compression and sealing integrity.
- Multiple dog locks, toggles or quick-pins
- More moving components to maintain
- Greater potential for wear and stretching
- Components can seize in saltwater environments
One Central Point of Operation
A single 316 stainless-steel central locking bolt operates an internal galvanised steel strongback, providing a simplified locking arrangement with fewer moving components.
- Single central locking mechanism
- Uniform, equalised seal compression
- Solid silicone sealing ring
- Reduced maintenance requirements
With fewer moving components than conventional multi-point locking arrangements, the Seatite system is designed to reduce maintenance requirements and deliver dependable long-term performance in demanding marine environments.
How have Seatite hatches performed under independent load testing?
Seatite hatches have undergone independent hydraulic load and structural deflection testing by Curtis Assemble & Test Ltd (CAT) . The testing measured the hatch assembly's deflection under progressively applied structural loading.
Recorded at an applied load of 1.6 tonnes, with no seal fitted.
Independent structural loading applied during testing by Curtis Assemble & Test Ltd .
Highest load applied during the recorded test, with 1.7mm deflection measured.
The independent test demonstrates the hatch assembly's structural response under substantial applied loading. Test results should be considered alongside the installation arrangement, surrounding deck structure and applicable vessel or classification requirements.
Need a custom solution or have a project to discuss?
Our engineering team is ready to support your specification and procurement requirements.
LONG-TERM RELIABILITY
Designed for dependable marine service.
Type Approved
Bureau Veritas certified.
Trusted Worldwide
Installed on commercial vessels globally.
Expert Support
Engineering support from concept to sea.
LONG-TERM RELIABILITY
Designed for dependable marine service.
Type Approved
Bureau Veritas certified.
Trusted Worldwide
Installed on commercial vessels globally.
Expert Support
Engineering support from concept to sea.