Square Watertight
Deck Hatches:
560mm & 675mm Sizing
Bureau Veritas Type-Approved, flush-fitting access and emergency escape hatches designed for seamless shipyard integration and permanent durability.
Sizing & Specifications
Select the appropriate configuration below to ensure correct deck cut-outs during ship fabrication.
Both sizes can be supplied with optional heavy-duty hinges.
| Sizing Dimension | 560mm Square Hatch Configuration | 675mm Square Hatch Configuration |
|---|---|---|
| Clear Opening (Aperture) | 530mm x 530mm | 620mm x 620mm |
| Deck Cut-Out (Weld-in Steel) | 585mm x 585mm | 690mm x 690mm |
| Deck Cut-Out (Bolt-in Aluminium) | 610mm x 610mm | 715mm x 715mm |
| Overall Dimension (Bolt-in Ring) | 710mm x 710mm | 820mm x 820mm |
| Hatch Depth (Access Only) | 120mm | 130mm |
| Hatch Depth (Access / Escape) | 160mm | 170mm |
| Weight (Hatch Lid) | 20 kg | 22 kg |
| Weight (Steel Deck Ring) | 9 kg | 9 kg |
| Weight (Aluminium Deck Ring) | 11.5 kg | 11.5 kg |
| Hinges Option | Optional | Optional |
Type Approved Product
Management System Certified
Sizing & Specifications
Select the appropriate configuration below to ensure correct deck cut-outs during ship fabrication.
Both sizes can be supplied with optional heavy-duty hinges.
Type Approved Product
Management System Certified
Reliability Through Simplicity:
Eliminating Mechanical Failure Points
Standard commercial marine hatches often rely on complex multi-point dog locks, DIN toggles or quick-pins. With multiple moving components exposed to demanding marine environments, these systems can be more susceptible to wear, stretching or seizing over time.
Seatite simplifies the locking arrangement with a single 316 stainless-steel central locking bolt operating an internal galvanised steel strongback and solid silicone sealing ring. The central locking bolt applies uniform, equalised compression across the sealing system while reducing the number of moving components.
With fewer moving components than conventional multi-point locking arrangements, the Seatite system is designed to reduce maintenance requirements and deliver dependable long-term performance in demanding marine environments.
With only one central point of operation, there are fewer moving components to maintain. This simplified locking arrangement supports reduced maintenance requirements and dependable long-term performance in demanding marine environments.
Reliability Through Simplicity:
Eliminating Mechanical Failure Points
Standard commercial marine hatches often rely on complex multi-point dog locks, DIN toggles or quick-pins. With multiple moving components exposed to demanding marine environments, these systems can be more susceptible to wear, stretching or seizing over time.
Seatite simplifies the locking arrangement with a single 316 stainless-steel central locking bolt operating an internal galvanised steel strongback and solid silicone sealing ring. The central locking bolt applies uniform, equalised compression across the sealing system while reducing the number of moving components.
With fewer moving components than conventional multi-point locking arrangements, the Seatite system is designed to reduce maintenance requirements and deliver dependable long-term performance in demanding marine environments.
With only one central point of operation, there are fewer moving components to maintain. This simplified locking arrangement supports reduced maintenance requirements and dependable long-term performance in demanding marine environments.
Optimising Shipyard Installation
Flexible Deck Ring Options
Seatite square hatches are available with an LM6 marine-grade aluminium deck ring, providing a lightweight, corrosion-resistant installation solution manufactured from the same material family as the hatch cover. For steel vessel applications, a fabricated steel deck ring is also available, allowing direct welding into compatible steel deck plating where this better suits the vessel structure and installation method.
LM6 Marine-Grade Aluminium
The square hatch cover and aluminium deck ring are manufactured from high-quality LM6 marine-grade aluminium (BS1490), combining lightweight operation with excellent corrosion resistance for demanding marine environments. Material traceability is maintained throughout the manufacturing process.
Certified Watertight Performance
Seatite hatches are Bureau Veritas Type-Approved for watertight applications at a certified pressure of 5.5 psi, equivalent to approximately 12 ft (3.7 m) of water head. Seatite hatches have additionally been pressure tested at more than 35 psi, approximately 80 ft (24 m) of water head.
- T-Handle Key – Used to operate the central locking mechanism.
- LM6 Aluminium Hatch Cover – Cast LM6 marine-grade aluminium (BS1490) hatch cover with anti-slip surface and integral solid silicone sealing ring fitted to the underside.
- Nylon Bush / Stop – Component within the central locking assembly.
- 316 Stainless-Steel Central Locking Bolt – Operates the internal locking mechanism.
- Preload Spring – Supports controlled loading within the locking assembly.
- Four-Arm Strongback – Internal locking component providing even seal compression around the hatch.
- Deck Ring – LM6 aluminium deck ring shown; fabricated steel deck ring also available for steel-vessel applications. A fabricated steel deck ring is also available as an option for steel-vessel applications.
Emergency Escape Configuration
Where an emergency escape configuration is specified, an additional underside lever handle can be supplied to enable rapid operation from below deck.
Optimising Shipyard Installation
Flexible Deck Ring Options
Seatite square hatches are available with an LM6 marine-grade aluminium deck ring, providing a lightweight, corrosion-resistant installation solution manufactured from the same material family as the hatch cover. For steel vessel applications, a fabricated steel deck ring is also available, allowing direct welding into compatible steel deck plating where this better suits the vessel structure and installation method.
LM6 Marine-Grade Aluminium
The square hatch cover and aluminium deck ring are manufactured from high-quality LM6 marine-grade aluminium (BS1490), combining lightweight operation with excellent corrosion resistance for demanding marine environments. Material traceability is maintained throughout the manufacturing process.
Certified Watertight Performance
Seatite hatches are Bureau Veritas Type-Approved for watertight applications at a certified pressure of 5.5 psi, equivalent to approximately 12 ft (3.7 m) of water head. Seatite hatches have additionally been pressure tested at more than 35 psi, approximately 80 ft (24 m) of water head.
- T-Handle Key – Used to operate the central locking mechanism.
- LM6 Aluminium Hatch Cover – Cast LM6 marine-grade aluminium (BS1490) hatch cover with anti-slip surface and integral solid silicone sealing ring fitted to the underside.
- Nylon Bush / Stop – Component within the central locking assembly.
- 316 Stainless-Steel Central Locking Bolt – Operates the internal locking mechanism.
- Preload Spring – Supports controlled loading within the locking assembly.
- Four-Arm Strongback – Internal locking component providing even seal compression around the hatch.
- Deck Ring – LM6 aluminium deck ring shown; fabricated steel deck ring also available for steel-vessel applications. A fabricated steel deck ring is also available as an option for steel-vessel applications.
Emergency Escape Configuration
Where an emergency escape configuration is specified, an additional underside lever handle can be supplied to enable rapid operation from below deck.
SOLAS Compliance & Regulatory Integration
The 675mm Square Hatch provides a 620mm × 620mm clear opening and can be supplied in an Access / Escape configuration for applications where the hatch forms part of an emergency escape arrangement.
In the escape configuration, the hatch retains its external locking capability while incorporating an internal lever handle that allows the central locking mechanism to be released from below deck. This provides an independent means of opening the hatch from the underside when required for emergency egress.
Final suitability should be confirmed against the applicable SOLAS requirements, vessel arrangement, flag-state and classification requirements.
Key Compliance Standards
- SOLAS Chapter II-1 – Watertight Integrity
- SOLAS Chapter II-2 Regulation 13 – Means of Escape
- Bureau Veritas Type Approval
- Technical documentation for class review
Explore Seatite technical documentation, type approval and guidance relating to watertight integrity, means of escape and classification requirements in our Technical Resource Hub.➡️
SOLAS Compliance & Regulatory Integration
The 675mm Square Hatch provides a 620mm × 620mm clear opening and can be supplied in an Access / Escape configuration for applications where the hatch forms part of an emergency escape arrangement.
In the escape configuration, the hatch retains its external locking capability while incorporating an internal lever handle that allows the central locking mechanism to be released from below deck. This provides an independent means of opening the hatch from the underside when required for emergency egress.
Final suitability should be confirmed against the applicable SOLAS requirements, vessel arrangement, flag-state and classification requirements.
Key Compliance Standards
- SOLAS Chapter II-1 – Watertight Integrity
- SOLAS Chapter II-2 Regulation 13 – Means of Escape
- Bureau Veritas Type Approval
- Technical documentation for class review
Explore Seatite technical documentation, type approval and guidance relating to watertight integrity, means of escape and classification requirements in our Technical Resource Hub.➡️
Frequently Asked Questions
Technical Specifications & Compliance
Technical answers covering Seatite square watertight deck hatch specifications, installation, SOLAS compliance, locking systems and independent load testing.
What is the technical difference between a weathertight and a watertight deck hatch?
WEATHERTIGHT
External weather protection
Designed to resist water ingress from external weather conditions such as rain and sea spray. Weathertight protection is typically used where the hatch is exposed to weather rather than sustained hydrostatic water pressure.
WATERTIGHT
Certified hydrostatic pressure protection
Seatite hatches are Bureau Veritas Type-Approved for watertight applications at a certified pressure of 5.5 psi, equivalent to approximately 12 ft (3.7 m) of water head.
Tested beyond the certified requirement: While 5.5 psi / 12 ft of water head is the certified pressure covered by the Bureau Veritas Type Approval, Seatite hatches have also been pressure tested at more than 35 psi, equivalent to approximately 80 ft (24 m) of water head.
Can Seatite square hatches be specified for SOLAS emergency escape applications?
Seatite square hatches can be supplied in Access / Escape configurations for applications where the hatch forms part of an emergency escape arrangement. The escape configuration combines external security with the ability to release the hatch independently from below deck.
The larger square configuration provides a generous clear opening for applications where the hatch forms part of an emergency escape arrangement.
A compact configuration for installations where space is restricted. Suitability for use as part of an escape arrangement should be confirmed against the requirements applicable to the vessel and installation.
When specified in an Access / Escape configuration, the hatch remains lockable from above for security while an internal lever handle allows the central locking mechanism to be released from below deck. This enables independent operation from the underside when the hatch is required for emergency egress.
SOLAS integration: Seatite escape configurations are designed for applications where means-of-escape requirements under SOLAS Chapter II-2 Regulation 13 apply. Final suitability should be confirmed against the vessel arrangement, flag-state and applicable classification requirements.
What are the exact deck cut-out dimensions and corner radii for Seatite square hatches?
To ensure seamless shipyard fabrication, the exact deck cut-out specifications and corner radii are as follows:
Corner radius: 45mm
Corner radius: 45mm
Corner radius: 216mm
Corner radius: 216mm
Do Seatite round hatches offer both aluminium and steel deck ring options?
Seatite round hatches are available with an LM6 marine-grade aluminium deck ring as well as a fabricated steel deck ring option for steel vessel applications. This allows the deck-ring configuration to be selected to suit the vessel structure and installation method.
LM6 Marine-Grade Aluminium
The aluminium deck ring is manufactured from LM6 marine-grade aluminium (BS1490), the same material family as the hatch cover, providing a lightweight and corrosion-resistant installation option.
- LM6 marine-grade aluminium
- Lightweight deck-ring option
- Excellent corrosion resistance
- Suitable for alternative vessel construction and installation methods
Fabricated Steel Deck Ring
For steel vessel applications, Seatite can also supply a fabricated steel deck ring designed for direct integration with the surrounding steel deck structure.
- Direct welding into compatible steel deck plating
- Straightforward steel-to-steel installation
- Reduces the need for a mechanically bolted deck-ring interface
- Reduces galvanic-isolation considerations at the deck-ring interface
How does the single central locking bolt design improve reliability over multi-toggle systems?
Standard commercial marine hatches often rely on complex multi-point dog locks, DIN toggles or quick-pins. With multiple moving components exposed to demanding marine environments, these systems can be more susceptible to wear, stretching or seizing over time.
Multiple Mechanical Failure Points
Complex locking arrangements rely on multiple components operating correctly together to maintain compression and sealing integrity.
- Multiple dog locks, toggles or quick-pins
- More moving components to maintain
- Greater potential for wear and stretching
- Components can seize in saltwater environments
One Central Point of Operation
A single 316 stainless-steel central locking bolt operates an internal galvanised steel strongback, providing a simplified locking arrangement with fewer moving components.
- Single central locking mechanism
- Uniform, equalised seal compression
- Solid silicone sealing ring
- Reduced maintenance requirements
With fewer moving components than conventional multi-point locking arrangements, the Seatite system is designed to reduce maintenance requirements and deliver dependable long-term performance in demanding marine environments.
How have Seatite hatches performed under independent load testing?
Seatite hatches have undergone independent hydraulic load and structural deflection testing by Curtis Assemble & Test Ltd (CAT). The testing measured the hatch assembly's deflection under progressively applied structural loading.
Recorded at an applied load of 1.6 tonnes, with no seal fitted.
Independent structural loading applied during testing by Curtis Assemble & Test Ltd.
Highest load applied during the recorded test, with 1.7mm deflection measured.
The independent test demonstrates the hatch assembly's structural response under substantial applied loading. Test results should be considered alongside the installation arrangement, surrounding deck structure and applicable vessel or classification requirements.
Need a custom solution or have a project to discuss?
Our engineering team is ready to support your specification and procurement requirements.
LONG-TERM RELIABILITY
Designed for dependable marine service.
Type Approved
Bureau Veritas certified.
Trusted Worldwide
Installed on commercial vessels globally.
Expert Support
Engineering support from concept to sea.
LONG-TERM RELIABILITY
Designed for dependable marine service.
Type Approved
Bureau Veritas certified.
Trusted Worldwide
Installed on commercial vessels globally.
Expert Support
Engineering support from concept to sea.