Returns, Cancellation & Warranty Policy
This policy explains the arrangements for order cancellations, authorised returns, damaged or incorrect goods and manufacturer warranty claims for products supplied by Seatite.
This policy should be read together with Seatite's Terms & Conditions and the quotation or order confirmation applicable to the relevant purchase.
Last updated: 6 October 2026
Who This Policy Applies To
This policy applies to products supplied by Seatite to customers purchasing in the course of a business, trade, profession or commercial activity.
Seatite's standard commercial terms are intended for business-to-business transactions. This policy is therefore not intended to describe statutory cancellation or return rights that may apply to consumer purchases.
Where a specific quotation, Order Confirmation or separately agreed written contract contains different provisions relating to cancellation, returns or warranty, those specifically agreed terms will take precedence for that order.
Cancelling or Amending an Order
If a Buyer wishes to cancel or amend an accepted order, Seatite should be contacted as soon as possible.
Acceptance of a cancellation or amendment is not automatic and will depend on factors including the stage of manufacture, whether materials have been ordered or committed, whether the Goods have been configured specifically for the Buyer and whether the Goods have already been despatched.
Where Seatite agrees to a cancellation or amendment, the Buyer may be required to pay reasonable costs already incurred in connection with the order, together with any restocking or administration charge agreed or notified as part of the cancellation.
Contact us early: The earlier Seatite receives a cancellation or amendment request, the more likely it is that production or procurement can be changed before further costs are incurred.
Made-to-Order & Configured Goods
Some Seatite products may be manufactured, assembled, machined, configured or otherwise prepared specifically for a Buyer's order.
Once manufacture or preparation has commenced, cancellation of such Goods may not be possible or may result in charges reflecting work completed, materials committed and other reasonable costs incurred by Seatite.
Goods manufactured or configured specifically for a Buyer will not normally be accepted for return simply because they are no longer required, were ordered in error or are unsuitable due to information or specifications supplied by the Buyer.
Buyers should verify product size, clear opening, deck-ring configuration, installation requirements and other critical dimensions before approving an order or commencing related vessel fabrication.
Authorised Returns
Goods must not be returned to Seatite without prior agreement.
A Buyer wishing to return Goods should contact Seatite with the relevant order or invoice details, the product concerned and the reason for the proposed return.
If a return is accepted, Seatite will provide appropriate return instructions. Returned Goods should be securely packaged and returned in the condition reasonably required for Seatite to inspect them.
Acceptance of Goods for inspection does not itself constitute acceptance of a refund, credit or warranty claim. Seatite may first need to inspect and assess the Goods.
Damaged, Incorrect or Missing Goods
Buyers should inspect Goods as soon as reasonably practicable after delivery or collection.
If Goods arrive visibly damaged, an incorrect product has been supplied or part of an order appears to be missing, the Buyer should notify Seatite promptly so that the matter can be investigated.
Where possible, the notification should include:
- the order, quotation or invoice reference;
- details of the product concerned;
- a clear description of the issue;
- photographs of any visible damage or incorrect Goods;
- photographs of the external and internal packaging where transit damage is suspected; and
- relevant delivery or carrier documentation, where available.
Transit damage: Where damage may have occurred during carriage, please retain the Goods and their packaging where reasonably practicable until Seatite confirms whether they need to be inspected or retained for a carrier claim.
12-Month Manufacturer Warranty
Seatite provides a 12-month manufacturer's warranty from the date of delivery against defects in materials or manufacture arising under normal and appropriate use, subject to the conditions and exclusions in this policy and our Terms & Conditions.
The warranty applies to defects attributable to the manufacture or materials of the Seatite product supplied.
A warranty claim should be notified to Seatite as soon as reasonably practicable after the Buyer becomes aware of the suspected defect and within the applicable warranty period.
The existence of the warranty does not remove the Buyer's responsibility to install, operate and maintain the product appropriately or to follow applicable Seatite technical information.
What the Warranty Does Not Cover
The manufacturer's warranty does not cover a defect or damage to the extent it results from circumstances outside Seatite's responsibility, including:
- incorrect installation, welding, fabrication, integration or commissioning;
- failure to follow applicable installation, operating or maintenance information;
- misuse, neglect, accident or deliberate damage;
- unauthorised alteration, modification, repair or disassembly;
- operation outside the stated product specification or intended application;
- unsuitable surrounding vessel structure or installation conditions;
- damage caused by external equipment, third-party components, impact or other external causes;
- corrosion, chemical exposure or environmental conditions outside those reasonably contemplated for the product or application;
- normal wear and tear of serviceable or replaceable components, unless the condition is itself caused by a defect in materials or manufacture; or
- continued use of the product after a defect becomes apparent where doing so causes additional avoidable damage.
Where Seatite determines that an issue has resulted from installation, vessel integration or another cause outside the scope of the warranty, Seatite may, where practicable, offer technical assistance, replacement components or repair on a chargeable basis.
Making a Warranty Claim
To help Seatite investigate a warranty claim efficiently, the Buyer should contact us with sufficient information to identify the product and understand the reported issue.
Provide the order, invoice or product details and explain the issue experienced.
Supply photographs, installation information or other reasonable technical information requested to assist the assessment.
Seatite will review the information and advise whether further inspection, testing or return of the product is required.
Depending on the nature of the reported issue, Seatite may reasonably request:
- photographs or video showing the reported defect;
- product identification and order information;
- details of the installation and vessel application;
- information about operating conditions and when the issue was first identified;
- relevant maintenance or inspection information; or
- return of the affected product or component for inspection.
Assessment & Remedy
Seatite will assess warranty claims using the information reasonably available and may inspect or test the affected product or component where necessary.
If Seatite confirms that a defect is covered by the manufacturer's warranty, Seatite will determine an appropriate remedy having regard to the nature of the defect and the circumstances of the claim.
The remedy may include:
- repair of the affected product or component;
- replacement of the defective component;
- replacement of the affected product; or
- another reasonable remedy agreed between Seatite and the Buyer.
Unless Seatite expressly agrees otherwise in writing, the warranty does not include vessel removal, dry-docking, installation, reinstallation, welding, fabrication, travel or other third-party labour or project costs.
Any remedy remains subject to the liability provisions contained in Seatite's .
Return Carriage & Costs
The arrangements for return carriage will depend on the reason for the return and should be agreed with Seatite before Goods are sent back.
Where Seatite confirms that Goods are defective, incorrect or otherwise subject to a valid claim for which Seatite is responsible, Seatite will arrange or reimburse reasonable return carriage where appropriate and agreed.
Where a return is accepted for the Buyer's convenience, or a reported issue is found not to result from a defect for which Seatite is responsible, the Buyer may be responsible for carriage, inspection, testing, repair or other reasonable costs incurred.
Goods returned without prior authorisation may be refused or may result in additional handling or carriage costs.
Contractual & Legal Rights
This policy describes Seatite's standard commercial arrangements for cancellations, returns and its 12-month manufacturer's warranty.
The manufacturer's warranty is in addition to, and does not exclude or restrict, any rights or remedies that cannot lawfully be excluded or restricted.
Nothing in this policy limits or excludes liability where doing so would be unlawful. Any limitation or exclusion is subject to the provisions of Seatite's Terms & Conditions and applicable law.
Contact Us
To request an order amendment or cancellation, arrange an authorised return, report damaged or incorrect Goods, or make a warranty claim, please contact Seatite.
Contact Seatite
Seatite
The Shipyard, Brightlingsea, Essex, CO7 0AR, United Kingdom
Email: info@seatite.co.uk
Telephone: +44 (0)1206 636 923
Website: seatite.co.uk